AZZA Helios 910R Mid-Tower Case - More Pics and Closer Look

Article Index
AZZA Helios 910R Mid-Tower Case
More Pics and Closer Look
AZZA Helios 910R Case - Specs
Installation and Testing
Final Thoughts and Conclusion

As you can see in the next pictures (below) on the bottom of the Helios 910R you've got even more airflow and room for yet another fan. Seeing as this case features the power supply in the bottom of the case (which has become very popular lately) there is plenty of airflow for your power supply to draw in cool air from the bottom and then expel it out of the rear of the case. As we continue with this review you'll see that airflow is a major feature of the AZZA Helios 910R case.

usb .jpg
AZZA Helios 910R Case - Front USB/Sound Ports
bottom .jpg
AZZA Helios 910R Case - Bottom View

 

In these next pictures below you'll see even more fans (4 fans in total come pre-installed in the Helios 910R). We've got a 140mm fan in the top of the case, another 140mm fan in the front which provides airflow onto the hard drive rack, a 120mm fan in the rear of the case, and of course the large 230mm fan on the side of the case. None of these 4 fans are of 24dBA so noise shouldn't be too much of an issue (we'll see if that is actually the case later on in this review).

side .jpg
AZZA Helios 910R Case - Inside View
top .jpg
AZZA Helios 910R Case - Top View

 

 

All of the PCI slots in the rear of the case feature included thumbscrews (pictured below, right).

fans .jpg
AZZA Helios 910R Case - Inside View (Top)
pci .jpg
AZZA Helios 910R Case - Inside View (PCI Card Slots)

 

The hard drive rack in the Helios 910R is removable (pictured below), in order to install a hard drive you will have to remove the rack which is attached with 8 thumbscrews and then comes out which allows you to install your hard drive into the rack.

harddrive .jpg
AZZA Helios 910R Case - Hard Drive Rack
rack2 .jpg
AZZA Helios 910R Case - Hard Drive Rack

 

The bottom of the Helios 910R case features some heavy-duty plastic/rubber feet which should prevent this case from ever slipping around. These feet are plastic with rubber bottoms and should prevent the case from ever slipping (if that's a issue your worried about).

Also picture below is the accessories/hardware that comes with the Helios 910R. The included accessories are pretty standard and give you more than enough screws to get your system installed into the case, you also get a few extra thumbscrews to make life easier.

feet .jpg
AZZA Helios 910R Case - Bottom View
hardware .jpg
AZZA Helios 910R Case - Included Accessories

 

So there we go, that's a closer look at the AZZA Helios 910R, let's move onto the next sections and see how it performs.