Samsung NX10 Mini-DSLR Compact Camera - Dynamic Range and Image Stabilization

Article Index
Samsung NX10 Mini-DSLR Compact Camera
Samsung NX10 Full Specifications
Samsung NX10 Design and Size Comparison
NX10: Handling, Construction and More
NX10 Menu Options and Settings
NX10 Physical and Software Controls
NX10 Focus, White Balance, Burst and More
Image Quality and Noise - JPEG
Image Quality and Noise - RAW
Dynamic Range and Image Stabilization
Movie Mode and Final Thoughts


Dynamic Range:

A good sensor not only has to have low noise, but also be able to capture a wide range of light levels. Using its JPEG processing engine this will probably not be an issue as the NX10 does exhibit a tolerable level of shadow and highlight details. However it does tend to clip to white fairly quickly when presented with bright highlights.

 

Usually I expect a headroom of about 1EV in RAW files, however even though I was able to recover some detail up to -1 EV it was less than I would have expected. Perhaps Samsung is not recording as much information in their RAW files as they should, or the sensor is pushed a bit harder than it should. 

Here is what happened when trying to correct an overexposed area in Lightroom3. Clipping is in red.

 

 

Regular Exposure

-1 EV Correction in RAW

 

Image Stabilization:

In the NX10 image stabilization is provided by the lens. This helps to keep complexity out of the camera body but if you have a pancake lens it probably won't come with OIS. OIS is very helpful for people like me who - when past their due date - get a little unsteady. Even for those with steady hands this will allow you to shoot at lower ISOs and thus have cleaner images.  Of course OIS doesn't help if your subject is moving.

 

 
1/20 OIS

1/20 No OIS
   

1/10 OIS

1/10 No OIS
   

1/6 OIS

1/6 No OIS
   

1/3 OIS

1/3 No OIS

 

Its pretty clear that the OIS is quite effective.  While not perfect it should let you shoot 2-3 stops slower than you usually would. The OIS can be configured to activate only when the shutter is pressed or to just leave it on all the time.  You will probably want to stick with the former as leaving it active all the time eats up the battery.