Author Topic: PolarFLO CPU SF + VGA Block Feedback  (Read 6699 times)

Offline Zeus

  • I AM Canadian!
  • BCC Admin
  • Hard Modder!
  • *****
  • Posts: 3616
  • Karma: +678/-200
  • Gender: Male
  • [S]odbuster
    • View Profile
    • BCCHardware
PolarFLO CPU SF + VGA Block Feedback
« on: November 13, 2003, 12:10:53 PM »
I've just posted my review of the PolarFLO "SuperFinish" CPU Block as well as the PolarFLO VGA block.  It can be read over here.

Your comments, questions, and feedback is welcome!

Offline Death

  • Case Whacker
  • ***
  • Posts: 205
  • Karma: +2/-0
  • Gender: Male
  • Pumbaa
    • View Profile
    • Bio-Hazard
Re:PolarFLO CPU SF + VGA Block Feedback
« Reply #1 on: November 13, 2003, 12:57:19 PM »
That's some great stuff they make there at PolarFlo. One of these days I plan on getting a water cooling system. I'm still learning all I can about it right now, there's so many different components out there to research.......... :o
Mountain Mods U2-UFO, DFI LanParty UT NF4 Ultra-D, AMD A64 3000 (Venice), Ultra XL PC3200 (2x512), HIS X800XL, WD SATA 80Gig, Lite-On DVD & DL DVDRW, Thermaltake TWV 500w, Samsung 997DF 19" CRT.

Offline Seeker

  • Solder Master
  • ****
  • Posts: 833
  • Karma: +27/-25
  • Gender: Male
    • View Profile
Re:PolarFLO CPU SF + VGA Block Feedback
« Reply #2 on: November 13, 2003, 07:45:53 PM »
Hey greatly done again good heads up on the hose size do they plan to do sumthing about it i wonder i like the idea of changing or ordering what you need  12 or 3 o'clock position awesome...
Remember kids, if you happen to find yourself upside down and on fire, you've just discovered the meaning of "too fast".

Offline zip22

  • BCC n00b
  • *
  • Posts: 1
  • Karma: +0/-0
  • I'm a llama!
    • View Profile
Re:PolarFLO CPU SF + VGA Block Feedback
« Reply #3 on: November 14, 2003, 01:35:22 PM »
im looking into getting the polarflo cpu block and didn't realise they suggested that powerful of a pump.  i was wondering if the pump used in the review is a good one?  quite? reliable?

also, can you change the configuration of the gpu block yourself, or are the plugs glued in there?
« Last Edit: November 14, 2003, 02:14:02 PM by zip22 »

Offline LobbDogg

  • Solder Master
  • ****
  • Posts: 852
  • Karma: +15/-12
  • Gender: Male
  • and I'm a man who loves his Taffy!
    • View Profile
    • World of Xen
Re:PolarFLO CPU SF + VGA Block Feedback
« Reply #4 on: November 14, 2003, 01:52:23 PM »
Definitely nice products from PolarFLO, nice temps as well, wish my 9800 was that low  :D
Intel i7 650 | Asus P6TD Deluxe | Geforce 660 GT | 12 GB Patriot PC12800 | Corsair 600watt Modular PSU

Offline Zeus

  • I AM Canadian!
  • BCC Admin
  • Hard Modder!
  • *****
  • Posts: 3616
  • Karma: +678/-200
  • Gender: Male
  • [S]odbuster
    • View Profile
    • BCCHardware
Re:PolarFLO CPU SF + VGA Block Feedback
« Reply #5 on: November 14, 2003, 06:26:14 PM »
According to the temps, I could easily leave my card clocked up to 470MHz, but with my luck as of late, I don't think I will.  It is nice knowing that your gear is running nice a cool.

Offline slimeballzz

  • BCC n00b
  • *
  • Posts: 1
  • Karma: +0/-0
  • I'm a llama!
    • View Profile
Re:PolarFLO CPU SF + VGA Block Feedback
« Reply #6 on: January 30, 2004, 07:16:23 PM »
Does anyone know if the Polarflo VGA Card would fit on an ATI All In Wonder 9800 Card?

Offline Zeus

  • I AM Canadian!
  • BCC Admin
  • Hard Modder!
  • *****
  • Posts: 3616
  • Karma: +678/-200
  • Gender: Male
  • [S]odbuster
    • View Profile
    • BCCHardware
Re:PolarFLO CPU SF + VGA Block Feedback
« Reply #7 on: January 30, 2004, 09:40:42 PM »
I'm sure it will.  The main PCB layout (mounting holes) are the same, and it isn't much larger than the shim.